￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Operation
916 Ti
‑
Touch
￭￭￭￭￭￭￭￭
33
NOTICE
If a buret unit is connected, then a request appears to carry out
the
Prepare
function:
All tubings and the cylinder are rinsed with the
Prepare
function.
The preparing of the buret unit is described in the chapter
Manual
control
of the detailed manual.
￭
Confirm the message with
[OK]
.
The main dialog is displayed:
Switching off the instrument
CAUTION
The 916 Ti
‑
Touch must be switched off by pressing the power switch
on the rear of the instrument before the electricity supply is interrupted.
If this is not done, then there is a danger of data loss.
