￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Overview of the instrument
916 Ti
‑
Touch
￭￭￭￭￭￭￭￭
11
4.2
Rear of the instrument
3 4
5 6 7
8 9
1 2
10 11 12
Figure 2
916 Ti
‑
Touch rear
1
Electrode connector (Ind.)
For connecting pH, metal or ion-selective
electrodes with integrated or separate refer-
ence electrode. Socket F.
2
Electrode connector (Ref.)
For connecting reference electrodes, e.g.
Ag/AgCl reference electrode. Socket B,
4 mm.
3
USB connector (type A)
For connecting a printer, USB flash drive,
USB hub, Sample Processor etc.
4
Ethernet connector (RJ-45)
For connecting to a network.
5
Temperature sensor connector (Temp.)
For connecting temperature sensors (Pt1000
or NTC). Two B sockets, 2 mm.
6
Electrode connector (Pol.)
For connecting polarizable electrodes, e.g.
Pt wire electrodes. Socket F.
7
MSB connector (MSB 1 and MSB 2)
Metrohm Serial Bus. For connecting external
dosing devices, one additional stirrer or a
Remote Box. Mini DIN, 8-pin.
8
Power socket (Power)
For connecting the external power supply
unit.
9
Power switch
Switches the instrument on/off.
10
Electrode connector (iConnect)
For connecting electrodes with integrated
data chip (iTrodes).
11
Stirrer connector (present, depending
on the product version)
For connecting the propeller stirrer (802 Stir-
rer) to instruments without built-in magnetic
stirrer.
12
Type plate
Contains the serial number.
