￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Operation
915 KF Ti-Touch
￭￭￭￭￭￭￭￭
25
6 Operation
6.1
Switching the instrument on and off
Switching on the instrument
CAUTION
Peripheral devices (e.g., printers) must be connected and switched on
before you switch on the 915 KF Ti-Touch.
NOTE
English is set as the default dialog language when the instrument is
switched on for the first time.
Information about changing the dialog language can be found in the
chapter
Selecting the dialog language
of the detailed manual.
Proceed as follows:
1
￭
Press the power switch on the left-hand side of the back panel of
the 915 KF Ti-Touch.
The 915 KF Ti-Touch is initialized. A system test is performed. This
process takes some time.
