Metrohm 892 Professional Rancimat, Manual

Page: 35 / 63

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Operation
892 Professional Rancimat
￭￭￭￭￭￭￭￭
27
Figure 15 Measuring arrangement (schematic representation)
1 Reaction vessel 2 Sample
3 Heating block 4 Measuring vessel
5
Conductivity measuring cell
6
Measuring solution
4.2 Calibration functions
4.2.1 Determining the cell constant
The cell constant of the conductivity sensor (6.0913.130) is normally at
1.1 ± 0.1 cm-1. This accuracy is sufficient for an
induction time determi-
nation since only the shape of the curve is evaluated. For the determina-
tion of the
stability time , however, the conductivity change is measured
in absolute terms. As a rule, the time until an increase in conductivity of
50 µS/cm is determined. The cell constant for the conductivity electrode
being used has to be calibrated in order to be able to measure the con-
ductivity correctly.