manualshive.com logo in svg

Metrohm 884 Professional VA, Manual - Short Instructions

Share
Download
Metrohm 884 Professional VA Manual - Short Instructions Download Page 16

1.6 Safety instructions

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

8

￭￭￭￭￭￭￭￭

884 Professional VA

1.6.5 

Metallic liquid mercury

WARNING

Mercury is a heavy liquid metal. Highly toxic mercury vapor forms even
at room temperature. Breathing in mercury vapor poses the risk of
chronic mercury poisoning. Therefore, observe the following points
when handling a MME pro containing mercury:

￭

Do not inhale mercury vapor.

￭

Only work with open containers of mercury while under a fume cup-
board.

￭

Avoid skin contact with mercury.

￭

Never store mercury in open containers.

￭

Keep the laboratory area for work involving mercury well-ventilated.

￭

Use amalgamation to bind any spilled mercury. Never use a broom
or vacuum.

￭

Only have mercury disposed of by a professional. Never dispose of
mercury in household or domestic waste.

NOTE

For detailed information, observe the 

Mercury Handling Guidelines

(8.000.5054XX).

1.6.6 

Tubing and capillary connections

CAUTION

Leaks in tubing and capillary connections are a safety risk. Tighten all
connections well by hand. Avoid applying excessive force to tubing con-
nections. Damaged tubing ends lead to leakage. Appropriate tools can
be used to loosen connections.

Check the connections regularly for leakage. If the instrument is used
mainly in unattended operation, then weekly inspections are manda-
tory.

Summary of Contents for 884 Professional VA




























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands