Metrohm 2.870.0010, Installation And Tutorial

Page: 36 / 44

3.2 Carrying out titrations
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
30 ￭￭￭￭￭￭￭￭
870 KF Titrino plus
The result and the sample size of each determination are shown. On/
Off removes the selected determination from the statistics. The line
will then be marked with an asterisk (*), the statistics will be recalcu-
lated automatically.
7 Cancel the conditioning
￭
Press
[STOP]
.
Conditioning is canceled and the dosing cylinder is filled.
3.2.4 Creating a titration method
Below you will find a description of how to create your own method for
water content determination. The 870 KF Titrino plus contains method
templates which are already configured except for a few parameters.
The water content of a sample should be determined by means of a triple
determination. If you have a printer connected, then a report with the
result and the curve should be printed out automatically at the end of the
determination.
Proceed as follows:
1 Load the method template
￭
In the main dialog, select Method and confirm with [OK] .
The method table with the stored templates opens:
￭
Select the template KFT Ipol .
￭
In the function bar, select the
Load
function and confirm with
[OK]
.
The method template KFT Ipol is now loaded and is displayed in the
main dialog under Method .