3 «Mix Control» software
845 Eluent Synthesizer / Instructions for Use 8.845. 8001EN
16
3 «Mix Control» software
The
845 Eluent Synthesizer
is controlled with the «
Mix Control
» PC
software provided. This section explains the ideas behind the software
and how to use it. For further information please consult the online help
of the software.
3.1
Introduction to the software
3.1.1
The principle of «Mix Control»
What and how much is to be mixed in which ratio is defined via
Depot
(see
section 3.4.1
) and
Method
(see
section 3.3
). In the
Depot
the
Components
(see
section 3.4.2
) connected to the instrument are
specified. The
Method
is the recipe for preparing the mixture.
3.1.2
Procedure after the first start of «Mix Control»
1. Define
the
Users
(see
section 3.4.5
2. Draw up and save the configuration for the
Depot
(see
section
).
3. Draw up and save a
Method
(see
).
After carrying out these steps you can already start mixing processes
(with
).
In the next step you should define the settings for
Directories
,
Re-
ports
,
Rinsing
and
GLP
.
3.2 Main
Window
3.2.1 Menus
Menu File
New... Method /
For creating and configuring a new
Method
. The pa-
rameters of the
Method
are set to the default values.
New... Depot
For creating and configuring a new
Depot
. The
DEPOT
window opens.
Save Method /
For saving the current
Method
under a new name.
Save Method as...
For saving the current
Method
under a new name.
Summary of Contents for 2.845.0010 845
Page 1: ...845 Eluent Synthesizer Handbuch 8 845 8001EN...
Page 2: ......
