METRODATA NetTESTER FAMILY USER MANUAL
76-02-107 Rev.A
Page 111 of 133
SNMP TRAPS
Np alarm trap Disabled
sLa alarm trap Disabled
Monitor alarm trap Disabled
Alarm summary trap Disabled
Included here is the NP (No Peer) alarm that is generated by each session when the
peer cannot be contacted.
14.3.8
Reports
Menu Tree: Main Set-Up /
P
erf Monitoring / [peer] / Rep
O
rts
The PM session will monitor the parameters and present the following set of reports
showing the results:
REPORTS
1 - temp <display>
2 - 15min reports <display>
3 - 24hr totals <display>
4 - 24hr reports <display>
5 - 30-day totals <display>
Clear Data
Reports all use a standard layout, with minor variations, as shown below:
Y.1731 Performance Report
-------------------------
Peer2 "Peer2" MEP1 RMEPID 201
2-way/
Logged time: 2376s Outbound Inbound SLA Alarms
-------------------------------------- -------------
Sent Frames 13 13 NP 2303s
Received Frames 13 13 SLA 0s
Lost Frames 0 0 MON 0s
Frame Loss Ratio 0% 0% 0.01%
Min Delay 0.0352ms
Average Delay 0.0353ms
Max Delay 0.0354ms 100ms
Good Delays 100% 95%
Average Delay Var 0.0080ms 0.0080ms
Max Delay Variation 0.0082ms 0.0083ms 10ms
Good Delay Vars 100% 100% 95%
<Esc> - exit, C - clear, <Enter> - refresh
