Metro DataVac MetroSHINGLE Installation Details Download Page 1 | Manualshive

Page: 1 / 17

background image

Installation Details

MetroSHINGLE

Indicates critical areas of installation

MetroSHINGLE

Installation Details

1

©Copyright, all rights reserved, Metro Roof Products, Sept 2009

rev 7/5/13

These install details are provided to demonstrate a recommended

installation method for Metro Roof panels and accessories.

practices used in the United States.

Issued December 29, 2005

Revised July 5, 2013

R

R

Installers of Metro roof panels

and accessories should have knowledge of roof structures, an
understanding of how to work with stone-coated steel panels and
accessories, and be experienced at working on sloped roof

INSTALLATION WARNING!

environments

.

R

Metro recommends installers of MetroSHINGLE products use a
Metro Cutter, and have completed a 'SMART-Start On Site installer
Training Orientation Program’ (located at http://www.metroroofs.com/
SmartStartTraining.cfm) for each profile installed. Metro does not
consider its products to be “do-it-yourself’ (D.I.Y) mainly due to
specialized cutting & bending tools used during installation.

1
2
3
...
»

Summary of Contents for MetroSHINGLE


















Reviews:

No comments

Related manuals for MetroSHINGLE

Brand: X-METAL Pages: 18

Findley & Myers CB33

Brand: CABINETS TO GO Pages: 5

Findley & Myers AB124

Brand: CABINETS TO GO Pages: 4

Brand: &Tradition Pages: 3

Brand: &Tradition Pages: 3

hadley FKVSBC2SGY

Brand: Target Pages: 12

Brand: Wilhelm Schildmeyer Pages: 7

Brand: Amart Furniture Pages: 7

Brand: Songmics Pages: 11

STANDUP-CCF60-B

Brand: Touchboards Pages: 12

Forestry bench refined 4P

Brand: Weltevree Pages: 7

Kooper OP-AWSOF74-KPR

Brand: rst brands Pages: 24

Brand: Wallbed Gallery Pages: 16

OFFUICE STAR SPENCER

Brand: Avenue Six Pages: 2

Brand: DHP Pages: 23

Brand: Enclume Pages: 2

Brand: Eberhart Pages: 4

Brand: Unfinished Furniture of Wilmington Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands