The DSP Toolchest
432
third-harmonic distortion. The quartic term creates both second-harmonic and fourth-harmonic
distortion.
Theres non-linearities can be applied to generate a wide variety of wave-shapers and distortion
effects.
Parameters:
x^1
[-4, 4]
Sets the coefficient of the linear term of the map.
x^2
[-4, 4]
Sets the coefficient of the quadratic term of the map.
x^3
[-4, 4]
Sets the coefficient of the cubic term of the map.
x^4
[-4, 4]
Sets the coefficient of the quartic term of the map.
Master Gain
[-4, 4]
Sets the overall gain of the output post mapping.
Master Bypass
{On, Off}
When enabled, bypasses the process so that the output is the same as the input.
MIO 4th Order Symmetrical Nonlinear Map
• Synopsis: 4th Order Symmetrical Nonlinear Map
• Category: Distortion, Building Blocks
• Channels: 1
Description:
MIO SNL(4) Map applies a symmetrized version of the nonlinear map specified by the parameters.
This means that the applied non-linearity has the same relative polarity to the input signal polarity.
You can use this to apply a non-linearity that always reduces the amplitude of the input signal,
whether the input is positive or negative.
The non-linearity generated by this symmetrized map generates high-order odd harmonics for the
even order terms, and low-order odd harmonics for the odd order terms.
Parameters:
x^1
[-4, 4]
Sets the coefficient of the linear term of the map.
x^2
[-4, 4]
Sets the coefficient of the quadratic term of the map.
