The MIOConsole3d Application
198
•
Reset to Factory Settings
resets the configuration data on this unit back to the initial default ‘power
on’ state. This doesn’t have an impact on things like mixer routings, but will affect things like input
and output gains.
•
Delete Offline Unit
appears as an option on the “Add as offline unit” boxes; this will simply drop
that box from the mapped domain (as if you selected “Delete Offline unit” on the box after the
mapping is completed). This will remove any mapped routings that refer to this unit from the
mixer.
Figure 10.12: Map Boxes: Offline Unit options
Once you have made your mapping selections you can either click “Finish” to finalize the mapping
with the I/O channels automatically set based on the box mapping you have established, or you can
click “Next” to go to the
Channel Mapping Pane
:
Figure 10.13: Map Channels: Channel Mapping Pane
The Channel Mapping Pane lays out all Mixer Strip routings present in the Console file you are
importing. Here, you can review the current channel routing map and make individual adjustments,
or click the “Prev” button to return to the box mapping page.
The table in this pane includes the following columns:
•
Index
lists the number of the strip in the Mixer desk layout starting at the left (#1) and moving
to the right.
