MI 3121 Smartec Insulation / Continuity
Function selection
17
4 Instrument
operation
4.1 Function selection
For selecting test function, the
FUNCTION SELECTOR
shall be used.
Keys:
FUNCTION
SELECTOR
Select test / measurement function:
<
VOLT
> Voltage and frequency and phase sequence.
<
INS
> Insulation resistance measurement.
<
RLOW
/
CONT
> Resistance to earth connection and
equipotential bonding / continuous resistance measurement.
UP/DOWN
Selects sub-function in selected measurement function.
TAB
Selects the test parameter to be set or modified.
TEST
Runs selected test / measurement function.
MEM
Stores measured results / recalls stored results.
CAL
Compensation of test leads resistance.
Keys in
test parameter
field:
UP/DOWN
Changes the selected parameter.
TAB
Selects the next measuring parameter.
FUNCTION SELECTOR
Toggles between the main functions.
MEM
Stores measured results / recalls stored results.
General rule regarding enabling
parameters
for evaluation of measurement / test result:
- - -
No limit values.
Parameter
Value
Results will be marked as PASS or FAIL in accordance with
selected limit.
See
Chapter 5
for more information about the operation of the instrument test functions.
