METREL MI 3394 CE MultiTesterXA Instruction Manual Download Page 43

Page: 43 / 157

MI 3394 CE

MultiTester

Memory Organizer

5.1.1

Measurement statuses

Each measurement has:



a status (Pass or Fail or no status)



a name



results



limits and parameters

A measurement can be a Single test or an Auto Sequence

test. Statuses of single tests:



passed finished single test with test results



failed finished single test with test results



finished single test with test results and no status



empty single test without test results

Overall statuses of Auto Sequence

tests:



at least one single test in the Auto Sequence

passed and no single test failed



at least one single test in the Auto Sequence

failed



at least one single test in the Auto Sequence

was carried out and there were no other
passed or failed single tests.



empty Auto Sequence

with empty single

tests

Summary of Contents for MI 3394 CE MultiTesterXA






























































































































































METREL MI 3394 CE MultiTesterXA, Instruction Manual, Page: 43 / 157

Search results

Summary of Contents for MI 3394 CE MultiTesterXA

Reviews: