MI 2883 Energy Master
Introduction
9
Always short unused voltage inputs (L1, L2, L3) with neutral (N) input to prevent
measurement errors and false event triggering due to noise coupling.
Do not remove microSD memory card while instrument is recording or reading
data. Record damage and card failure can occur.
1.3 Applicable standards
The Energy Master are designed and tested in accordance with the following standards:
Electromagnetic compatibility(EMC)
EN 61326-2-2: 2013
Electrical equipment for measurement, control
and laboratory use
–
EMC requirements
–
Part
2-2:
Particular
requirements
-
Test
configurations,
operational
conditions
and
performance criteria for portable test, measuring
and monitoring equipment used in low-voltage
distribution systems
Emission: Class A equipment (for industrial
purposes)
Immunity for equipment intended for use in
industrial locations
Safety (LVD)
EN 61010-1: 2010
Safety requirements for electrical equipment for
measurement, control and laboratory use
–
Part 1: General requirements
EN 61010-2-030: 2010
Safety requirements for electrical equipment for
measurement, control and laboratory use
–
Part 2-030: Particular requirements for testing and
measuring circuits
EN 61010-031: 2002 + A1: 2008
Safety requirements for electrical equipment for
measurement, control and laboratory use
–
Part 031: Safety requirements for hand-held
probe assemblies for electrical measurement and
test
EN 61010-2-032: 2012
Safety requirements for electrical equipment for
measurement, control and laboratory use
Part 031: Safety requirements for hand-held
probe assemblies for electrical measurement and
test
Measurement methods
IEC 61000-4-30: 2015 Class S
Part 4-30: Testing and measurement techniques
–
Power quality measurement methods
IEC 61557-12: 2007
Equipment for testing, measuring or monitoring of
protective measures
– Part 12: Performance
measuring and monitoring devices (PMD)
IEC 61000-4-7: 2002 + A1: 2008
Part 4-7: Testing and measurement techniques
–
General guide on harmonics and interharmonics
measurements and instrumentation for power
