Page 6
Electronic Lock RFID Battery Tester User Manual
Rotating motor left/right
Close the locker door and hold them closed. Press one of the
buttons to rotate motor left or right. To lock the locker you
have to hold the button just the right amount of time. With
some practice, you should master it.
If the locker is already locked and you are unlocking it the
ejector force should open the door when the motor is in the
right position.
NOTE
If the motor does not rotate, check the cable connections and
Electronic Lock RFID installation.
Replacing Batteries
Open the battery compartment door.
Replace all 1,5V AA batteries. Pay attention on battery
orientation.
CAUTION
Use only 1,5V Alkaline or Ni-Mh batteries to avoid battery
leaks.
Technical data
Operating voltage
6 V DC – four 1.5V AA batteries
Current consumption
0.05 A standby / 1.2 A max
Operating temperature range
+5 to +40 °C
Dimensions in mm (w/h/l)
96/36/160
