AX-ADBOX1
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
1-800-221-0932
metraonline.com
REV. 11/29/12
AX-ADBOX1
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
1-800-221-0932
metraonline.com
REV. 11/29/12
AX-ADBOX1
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
1-800-221-0932
metraonline.com
REV. 11/29/12
AX-ADBOX1
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
1-800-221-0932
metraonline.com
REV. 11/29/12
FEATURES
• Provides accessory (12 volt 10 amp)
• Retains R.A.P. (Retained Accessory Power)
• Used in amplified, non-amplified systems, or digital amplified systems
• Retains chimes (GM)
• Turn signal click (GM)
• Provides NAV outputs (parking brake, reverse, mute, and V.S.S.)
• ASWC harness included (ASWC sold separately)
• Retains OnStar/OE Bluetooth
• Adjustable gain control for overall volume (on amplified systems)
• Adjustable gain control for chimes and OnStar (GM)
• Retains SYNC in Ford (if equipped)
• Adjustable gain control for SYNC (Ford)
• Retains Blind spot detection system in Chrysler/Dodge/Jeep (if equipped)
• High level speaker input
• Micro “B” USB updatable
• Retains balance and fade
• Retains digital fade
AX-ADBOX1
INSTALLATION INSTRUCTIONS
From the 16 pin harness
• Connect the
Red
wires to the ignition/accessory wire of the aftermarket radio
• Connect the
Orange/White
wire to the illumination wire of the aftermarket
radio. If the aftermarket radio does not have an illumination wire, tape off the
Orange/White
wire.
• Connect the
Blue/White
wire to the amp turn on wire of the aftermarket radio.
• Connect the
Brown
wire to the mute wire of the aftermarket radio. If the
aftermarket radio does not have a Mute wire, tape up the
Brown
wire.
• For remaining wires please refer to the vehicle wiring instructions.
For aftermarket radios with navigation built-in
• Connect the
Light Green
wire to the parking brake wire of the aftermarket
navigation radio.
• Connect the
Blue/Pink
wire to the V.S.S. or speed sense wire of the
aftermarket navigation radio.
• Connect the
Green/Purple
wire to the reverse wire of the aftermarket
navigation radio.
INTERFACE COMPONENTS
• AX-ADBOX1 Interface • 16-pin harness with stripped leads
TOOLS REQUIRED
• Cutting tool • Tape • Crimping tool
• Connectors (i.e. butt-connectors, bell caps, etc.)
Solstice
(f)
2006-2009
Sunfire
(g)
2000-2005
SAAB
9-7x
(g)
2005-2009
SATURN
Aura
(f)
2006-2009
Outlook
(e)
2007-2009
Relay
(g)
2005-2009
Sky
(f)
2006-2009
Vue
(e)
2008-2009
SUZUKI
XL-7
(e)
2007-2009
TOYOTA
4Runner*
(i)
2003-2011
Avalon*
(i)
2011
Camry/Camry Hybrid*
(i)
2010-2011
Corolla*
(i)
2005-2010
Highlander*
(i)
2008-2010
Prius*
(i)
2010
Rav4*
(i)
2004-2010
Sequoia*
(i)
2005-2011
Sienna*
(i)
2004-2011
Solara*
(i)
2004-2009
Tacoma*
(i)
2005-2011
Tundra*
(i)
2004-2011
Venza*
(i)
2009-2010
Yaris*
(i)
2007-2010
VOLKSWAGEN
CC
(x)
2009-up
EOS
(x)
2007-up
Golf
(DDIN only)
(x)
2002
Golf
(x)
2003-up
GLI
(x)
2008-up
GTI
(x)
2002-up
Jetta
(DDIN only)
(x)
2002
Jetta
(x)
2003-up
Passat
(x)
2002-up
Rabbit
(x)
2007-up
Tiguan
(x)
2009-up
FEATURES
• Provides accessory (12 volt 10 amp)
• Retains R.A.P. (Retained Accessory Power)
• Used in amplified, non-amplified systems, or digital amplified systems
• Retains chimes (GM)
• Turn signal click (GM)
• Provides NAV outputs (parking brake, reverse, mute, and V.S.S.)
• ASWC harness included (ASWC sold separately)
• Retains OnStar/OE Bluetooth
• Adjustable gain control for overall volume (on amplified systems)
• Adjustable gain control for chimes and OnStar (GM)
• Retains SYNC in Ford (if equipped)
• Adjustable gain control for SYNC (Ford)
• Retains Blind spot detection system in Chrysler/Dodge/Jeep (if equipped)
• High level speaker input
• Micro “B” USB updatable
• Retains balance and fade
• Retains digital fade
AX-ADBOX1
INSTALLATION INSTRUCTIONS
From the 16 pin harness
• Connect the
Red
wires to the ignition/accessory wire of the aftermarket radio
• Connect the
Orange/White
wire to the illumination wire of the aftermarket
radio. If the aftermarket radio does not have an illumination wire, tape off the
Orange/White
wire.
• Connect the
Blue/White
wire to the amp turn on wire of the aftermarket radio.
• Connect the
Brown
wire to the mute wire of the aftermarket radio. If the
aftermarket radio does not have a Mute wire, tape up the
Brown
wire.
• For remaining wires please refer to the vehicle wiring instructions.
For aftermarket radios with navigation built-in
• Connect the
Light Green
wire to the parking brake wire of the aftermarket
navigation radio.
• Connect the
Blue/Pink
wire to the V.S.S. or speed sense wire of the
aftermarket navigation radio.
• Connect the
Green/Purple
wire to the reverse wire of the aftermarket
navigation radio.
INTERFACE COMPONENTS
• AX-ADBOX1 Interface • 16-pin harness with stripped leads
TOOLS REQUIRED
• Cutting tool • Tape • Crimping tool
• Connectors (i.e. butt-connectors, bell caps, etc.)
Solstice
(f)
2006-2009
Sunfire
(g)
2000-2005
SAAB
9-7x
(g)
2005-2009
SATURN
Aura
(f)
2006-2009
Outlook
(e)
2007-2009
Relay
(g)
2005-2009
Sky
(f)
2006-2009
Vue
(e)
2008-2009
SUZUKI
XL-7
(e)
2007-2009
TOYOTA
4Runner*
(i)
2003-2011
Avalon*
(i)
2011
Camry/Camry Hybrid*
(i)
2010-2011
Corolla*
(i)
2005-2010
Highlander*
(i)
2008-2010
Prius*
(i)
2010
Rav4*
(i)
2004-2010
Sequoia*
(i)
2005-2011
Sienna*
(i)
2004-2011
Solara*
(i)
2004-2009
Tacoma*
(i)
2005-2011
Tundra*
(i)
2004-2011
Venza*
(i)
2009-2010
Yaris*
(i)
2007-2010
VOLKSWAGEN
CC
(x)
2009-up
EOS
(x)
2007-up
Golf
(DDIN only)
(x)
2002
Golf
(x)
2003-up
GLI
(x)
2008-up
GTI
(x)
2002-up
Jetta
(DDIN only)
(x)
2002
Jetta
(x)
2003-up
Passat
(x)
2002-up
Rabbit
(x)
2007-up
Tiguan
(x)
2009-up
