KIT COMPONENTS
TOOLS REQUIRED
Cutting tool
Socket wrench
Phillips screwdriver
KIT FEATURES
ISO-DIN
head unit
provisions
Pocket
provisions
99-8201
INSTALLATION
INSTRUCTIONS
APPLICATIONS
CAR
PAGE
TOYOTA
Celica 2000-02.........................................................1-3
Echo 2000-02...........................................................1-3
Radio
Housing
"C"
Radio
Housing
"E"
Mounting
Brackets
Re-connect the battery terminal and test the unit
for proper operation. Mount the head unit/kit
assembly to the sub-dash with (4) screws
previously removed in step #1.
7
6
Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adaptor and making
connections as shown. (Isolate and
individually tape off the ends of any
unused wires to prevent electrical short
circuit).
A
B
C
D
A) Strip wire ends back ½"
B) Twist ends together
C) Solder
D) Tape
(6) #6 x ¼"
Phillips Flat-
5
Align the holes in the
Mounting Brackets
with the holes in the ISO-DIN head unit and mount
the Brackets to the head unit with the screws included with the unit.
3
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2001 METRA ELECTRONICS CORPORATION
rev. 201202
