Metra Electronics 99-7614 Installation Instructions Manual Download Page 1

METRA - The World’s best kits

®

metraonline.com

REV

. 12/9/2016   INST99-7614

Installation instructions for part 99-7614

®

CAUTION!

 

All accessories, switches, climate controls panels, and 

especially air bag indicator lights must be connected before cycling 
the ignition. Also, do not remove the factory radio with the key in the 
on position, or while the vehicle is running.

© COPYRIGHT 2016  METRA ELECTRONICS CORPORATION

• ISO DIN radio provision with pocket

• ISO DDIN radio provision

• A) Radio housing • B) Radio brackets (C) • C) ISO DDIN trimplate • D) (4) #8 x 3/8” Phillips screws

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS

 (sold separately)

Wiring Harness: • 70-7552
Antenna Adapter: • 40-NI12

• Panel removal tool • Phillips screwdriver

TOOLS REQUIRED

Nissan NV 2012-2014, NV 

(without NAV)

 2015-up,

Nissan Quest 

(without NAV or rear seat entertainment) 

2011-2012

99-7614

Dash Disassembly

 

Nissan

  – NV 2012-2014 .................................................2-4
  – NV 2015-up (without NAV) ...............................2-4
  – Quest (without NAV or rear seat entertainment) 
 2011-2012......................................................5-6

Kit Assembly

  – ISO DIN radio provision with pocket .................... 7
  – ISO DDIN radio provision ..................................... 7

Table of Contents

B

A

C

D

Summary of Contents for 99-7614

















Reviews: