Metra Electronics 99-6544B Installation Instructions Download Page 1

CAUTION! 

 All accessories, switches, climate 

controls panels, and especially air bag indicator 

lights must be connected before cycling the 

ignition. Also, do not remove the factory radio 

with the key in the on position, or while the 

vehicle is running. 

Metra. The World’s Best Kits.

®

 

MetraOnline.com 

© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION 

REV. 10/5/17 INST99-6544B

I N S TA L L AT I O N I N S T R U C T I O N S

99-6544B

KIT FEATURES

•  ISO DIN radio provision with pocket
•  Painted scratch resistant matte black

KIT COMPONENTS

• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (8) #8 x 3/8” Phillips screws

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver  
• T-25 Torx driver • Cutting tool

TABLE OF CONTENTS

Dash Disassembly ..................................................2
Kit Preparation .......................................................3
Kit Assembly ..........................................................3

WIRING & ANTENNA CONNECTIONS

 (sold separately)

Wiring Harness: Please visit metraonline.com for 
additional adapters and accessories. 
Antenna Adapter: 40-EU55

A

B

C

D

Fiat 

500

 

2016-up*

*Visit 

MetraOnline.com

 for up-to-date vehicle specific applications.

Summary of Contents for 99-6544B

Page 1: ...NS 99 6544B KIT FEATURES ISO DIN radio provision with pocket Painted scratch resistant matte black KIT COMPONENTS A Radio trim panel B Radio brackets C Pocket D 8 8 x 3 8 Phillips screws TOOLS REQUIRED Panel removal tool Phillips screwdriver T 25 Torx driver Cutting tool TABLE OF CONTENTS Dash Disassembly 2 Kit Preparation 3 Kit Assembly 3 WIRING ANTENNA CONNECTIONS soldseparately Wiring Harness P...

Page 2: ...orx screws and unclip and remove the painted dash panel Figures B C DASH DISASSEMBLY Figure A Figure D Figure B Figure E Figure C Figure F 3 Remove 4 T 25 Torx from the radio trim panel including vents and remove the panel Figures D E 4 Remove 4 T 25 Torx to remove the radio Figure F Continue to Kit Preparation ...

Page 3: ...hillips screws Figure B 3 Remove the metal DIN sleeve and trim ring from the aftermarket radio 4 Slide the radio into the completed assembly and then secure it to the assembly using screws supplied with the radio Figure C 5 Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio Metra recommends using the proper mating adapter from Me...

Page 4: ...nicians IMPORTANT If you are having difficulties with the installation of this product please call our Tech Support line at 1 800 253 TECH Before doing so look over the instructions a second time and make sure the installation was performed exactly as the instructions are stated Please have the vehicle apart and ready to perform troubleshooting steps before calling Metra The World s Best Kits Metr...

Reviews: