Metra Electronics 99-5721 Installation Instructions Manual Download Page 1

Page: 1 / 16

APPLICATIONS

KIT FEATURES

KIT COMPONENTS

TOOLS REQUIRED

METRA. THE WORLD’S BEST KITS.™

1-800-221-0932

metraonline.com

INSTALLATION INSTRUCTIONS FOR PART 99-5721

2010 FORD TAURUS

(NON-NAV)

99-5721

• DIN Head unit provisions with pocket

• ISO DIN Head unit provision with pocket

• DDIN Head unit provisions

• ISO Stacked head unit provisions

• Painted Silver to match factory fi nish

• A) Radio Housing/Climate Control • B) (2) A/C Vent Trim Panels • C) ISO Brackets • D) ISO Trim Plate

• E) DDIN Brackets • F) DDIN Trim Plate • G) (10) #8x3/8” Phillips Screws • H) Pocket

WIRING & ANTENNA CONNECTIONS (Sold Separately)

• FRST - CAN BUS/RSE/THX/SYNC Interface

• XSVI-5520-NAV - Ford CAN BUS Interface

• AFDI-THX-01 - Ford Premium Sound Interface

• 40-EU10 - Antenna Adapter

• Panel Removal Tool • Phillips Screwdriver • Socket Wrench

Summary of Contents for 99-5721
















Search results

Summary of Contents for 99-5721

Reviews:

Related manuals for 99-5721

Brands by name

Popular brands

Metra Electronics 99-5721, Installation Instructions Manual

Search results

Summary of Contents for 99-5721

Reviews:

Related manuals for 99-5721

Brands by name

Popular brands