background image

CAUTION! 

 All accessories, switches, climate 

controls panels, and especially air bag indicator 

lights must be connected before cycling the 

ignition. Also, do not remove the factory radio 

with the key in the on position, or while the 

vehicle is running. 

Metra. The World’s Best Kits.

®

 

MetraOnline.com 

© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION 

REV. 3/27/18 INST95-9607B

I N S TA L L AT I O N I N S T R U C T I O N S

95-9607B

KIT FEATURES

•  ISO DDIN radio provision
•  Painted matte black

KIT COMPONENTS

• A) Radio housing with brackets and trim

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver  
• Torx screwdriver

TABLE OF CONTENTS

Dash Disassembly ..................................................2
Kit Assembly ..........................................................3

WIRING & ANTENNA CONNECTIONS

 (sold separately)

Wiring Harness: TBA

Antenna Adapter: 40-EU10 (w/NAV) 
40-EU56 (w/o NAV)

A

Porsche 

911

 (991) 

2012-2016

Boxster

 (981) 

2013-2016  

Caymen

 (981) 

2014-2016

Summary of Contents for 95-9607B

Page 1: ... METRA ELECTRONICS CORPORATION REV 3 27 18 INST95 9607B INSTALLATION INSTRUCTIONS 95 9607B KIT FEATURES ISO DDIN radio provision Painted matte black KIT COMPONENTS A Radio housing with brackets and trim TOOLS REQUIRED Panel removal tool Phillips screwdriver Torx screwdriver TABLE OF CONTENTS Dash Disassembly 2 Kit Assembly 3 WIRING ANTENNA CONNECTIONS soldseparately Wiring Harness TBA Antenna Adap...

Page 2: ...s starting from the rear then pull back to release the front of the panels Figure A 2 Remove 4 Torx screws securing the radio then unplug and remove the radio Figure B Continue to Kit Assembly DASH DISASSEMBLY Please visit Metraonline com for Dash Disassembly illustrations ...

Page 3: ...A 2 Locate the factory wiring harness and antenna connection in the dash and complete all necessary connections to the radio Metra recommends using the proper mating adapter from Metra and or Axxess Test the radio for proper operation 3 Secure the completed assembly to the dash using the factory screws 4 Reassemble the dash in reverse order of disassembly to complete the installation ...

Page 4: ...nicians IMPORTANT If you are having difficulties with the installation of this product please call our Tech Support line at 1 800 253 TECH Before doing so look over the instructions a second time and make sure the installation was performed exactly as the instructions are stated Please have the vehicle apart and ready to perform troubleshooting steps before calling Metra The World s Best Kits Metr...

Reviews: