Metra. The World’s Best Kits.
®
© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
REV. 1/23/19 INST95-5703B
I N S TA L L AT I O N I N S T R U C T I O N S
95-5703B
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
• ISO DDIN radio provision
• Painted matte black
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Vent housing • D) (4) 1/2” screws • E) (4) Panel clips
TOOLS REQUIRED
• 1/8” drill bit• Cutting tool
• Ford radio removal tools* • Phillips screwdriver
• T-20 Torx screwdriver
* Metra part number 86-5618
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................3
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
Wiring Harness: 70-1770 • 70-5510*
(sold separately)
Antenna Adapter: Not required
*Amplified models
A
B
C
D
E
Ford
Mustang
1994-2000
for more detailed information about the product and up-to-date vehicle
specific applications
