MetOcean Telematics MMI-513-00000, User Manual, Page: 37 / 56

iBCN – User Manual
TD 13 – 053
35
7.5 “O” Ring Maintenance
MetOcean Telematics strongly recommends that “O”
rings be serviced on a regular basis to ensure a reliable
seal.
Remove and lubricate at least once a year, preferably
more often, and replace every two years or sooner.
With regular maintenance, “O” rings will be very reliable
and trouble free. It has been, however, our observation
that most “O” rings are neglected for years and expected
to perform at the extremes of their design limits.
There are multiple “O” rings that require service on the
iBCN. The following table outlines the “O” rings used on
the various models of the device.
Lubricate “O” rings slightly with silicone grease; the
recommended grease is Parker Super O Lube.
Model Interface O-ring Specification MetOcean
Part #
iBCN
or
iBCN
Infinity
Head Assembly
to Battery Tube
M1.5x22 – DURO 90 106460
End Cap to
Battery Tube
M1.5x22 – DURO 90 106460
iBCN-OEM Head Assembly
bottom
M1.5x22 – DURO 90 106460
iBCN-RH
Head Assembly
to Remote Base
M1.5x22 – DURO 90 106460
Bulkhead to
Battery Case
2-218 – DURO 70 H00595
Battery Case to
Pressure
Switch
2-218 – DURO 70 H00595