iBCN – User Manual
TD 13 – 053
26
NOTE:
The Bluetooth Interface is only activated on
the device for 10 minutes. If no connection is
established within that time, the device must be
power cycled (remove and re-attach battery pack) to
attempt a new connection. Remember to allow
several minutes between removing power and re-
applying power to allow the circuit to fully discharge.
6.5 Configurator Software Tool
The Configurator Software Tool may be used with an
established Bluetooth connection to the Iridium Mini-
Beacon. The software tool displays device status,
read/write device configuration, as well as downloading
of the internal record log.
Once the software is connected, the main dialog screen
displays the device status information as shown below.
Figure 8: Configurator Software Tool
Summary of Contents for MMI-513-00000
Page 2: ......