iBCN – User Manual
TD 13 – 053
23
6.4 BlueTooth® Communication
The configuration of the device is controlled through the
Configurator Software Tool or the JouBeh Asset Website.
The device uses a BlueTooth® serial connection to
interface with the software tool. Prior to using the
Configurator Software, a BlueTooth® connection must
be established with the device.
The BlueTooth® interface on the device is activated
upon power-up, with the magnet removed, for a period
of 10 minutes. If there is no connection established
during this time, the BlueTooth® interface is disabled
until the next power cycle event.
1.
Remove magnet from the iBCN OEM head and
disconnect power for a minimum of 2 minutes.
2.
Install batteries to power-up the device.
3.
Add the Device to the PC’s BlueTooth® Devices. The
Beacon appears as
MMI-XXX
Bluetooth® Device.
Select
MMI-XXX
device and click
Next
Figure 3: Adding a Bluetooth Device
Summary of Contents for MMI-513-00000
Page 2: ......