26
•
Step 3:
Press the desired Measure Feature button in the Measure toolbar (circle in the example below).
•
Step 4:
Position the crosshair Probe over a feature edge.
•
Step 5:
Press the Point Counter to enter the point.
•
Step 6:
Probe the remaining points necessary to define the feature.
•
Step 7:
Press the “Finish” keypad button, or the green check-mark touchscreen button to complete the feature
measurement. The feature will be shown in the Feature list and Feature Detail screen.
8.8 Manual Edge Detection Probe
•
Step 1:
Press the Home button to return to the main measuring view(if necessary).
•
Step 2:
Press the Probe Menu button and select the Manual Edge probe.
•
•
Step 3:
Press the desired Measure Feature button in the Measure toolbar (circle in the example below).
•
Step 4:
Sweep the optical edge sensor over a feature edge. The probe will fire and a tone will be produced.
•
Step 5:
Press the point counter button to confirm entry of the edge crossing into the measurement.
•
Step 6:
Probe the remaining points necessary to define the feature.
•
Step 7:
Press the “Finish” keypad button, or the green check-mark touchscreen button to complete the feature
measurement. The feature will be shown in the Feature list and Feature Detail screen.
