13
Language
Press to select desired display language.
Product
Displays the Product Description.
Software Version
Displays the Mx100/Mx200 software version.
Release Date
Displays the Release Date of the Mx200 software currently running.
Copyright
Displays Metlogix Copywrite Information.
Options
Displays the currently enabled software/hardware options in the system.
Hardware version
Displays version numbers for installed hardware code. App, Boot, FPGA, MB,
and Edge.
Serial Number
Displays the serial number of the Mx200 unit in the format[XXXX-XXXX-XXXX].
Exit Settings
Press to Exit the Mx200 Readout Application.
2.3
Supervisor Password Protection
IMPORTANT
: Many of the settings configured in the Mx200 require password authentication in order to
modify them. In general, settings relating to the initial configuration and calibration of the readout will
be password protected. Settings that behave more like User Preferences are typically not password
protected.
Settings in the setup menu that appear with a blue “lock”
icon require password entry
prior to modification. Most important machine configuration settings fall into this category.
Use the procedure below to enter the Supervisor Password and unlock the system setup
screens.
