A1-MT1100
14
Parameter Description:
"Defa" in Row 1
Default gateway of equipment;
"Mask" in Row 2
Subnet mask of equipment;
"IP" in Row 3
Local IP address of equipment; (if it is connected with MT500, the
MT500 needs to point at the IP address)
"Port" in Row 4
Local port of equipment;
Operation Instructions of Buttons:
Key 1- "+" key: Press this button to add the current set value by 1; besides, the key can be pressed and
held;
Key 2- "-" key: Press this button to reduce the current set value by 1; the key can be pressed and held;
Key 3- ">>" key: When you press the button, the cursor will move to the next set value;
Key 4- "OK" key: When you press the button, the system will automatically save parameters and return to
the setting interface.
3.5.4 "3.SET WIFI"
Note:
This option is to set the parameters related to the WIFI function: WIFI function ON/ OFF, IP
port of WIFI connection server, WIFI connection name, WIFI connection password;
Select "3.SET WIFI" on the setting menu, and then press the "OK" button (Key 3) to enter the setting
interface. As shown in the following figure: