www.methven.com
Technical Specifications:
Inlet Connections:
All ½" BSP
* Regional specific regulations apply.
Please refer to your warranty statement at
www.methven.com
ROUND RAIL
Installation Guide
Methven warrants this product against manufacturing defects and that it is suitable for use
under the general operating conditions specified in this instruction sheet. However, regional
regulations apply and may affect your warranty. Please refer to
www.methven.com
or call
customer service for full details.
New Zealand
0800 804 222
Australia
1300 638 483
UK
0800 195 1602
Never use abrasives or abrasive cleaning agents to clean this product. Clean regularly with
contamination free warm soapy water and a damp soft cloth.
Periodically the filter washer should be removed from the end of the shower hose and cleaned.
Care and Cleaning:
439994
ISSUE A
Elbow Installation (if supplied):
13±2mm
26mm max
Step 1
• Install ½” BSP nipple at the desired elbow position.
• Wall lining hole should be cut or finished as per the
dimension shown in the diagram on the right.
• Cut off the threaded nipple 13±2mm from the wall lining
and apply thread seal tape to ensure a good seal.
Step 2
• Screw the elbow onto the nipple ensuring that
the o-ring is sufficiently compressed to create a
watertight seal.
• Ensure that the elbow is oriented vertically with
the outlet oriented downwards.
