Methven Australia Pty Ltd
ABN 15 104 813 390
Melbourne, Australia
www.methven.com
Max 40mm
32 - 46mm
Cold
Hot
Inlet
IMPORTANT
Please read all of the instructions before installation
MA018284
Waipori 3 Hole Hob Mounted Set
Basin: 01-8284
Bath: 01-8307
Illustration Only
Use of this product is recommended for domestic and commercial applications.
Domestic and commercial warranty terms and conditions vary. Please refer to the Methven website
for full warranty terms and conditions - www.methven.com
All pipework must be thoroughly flushed prior to the installation of the mixer.
Inline filter washers must be installed on both hot and cold supplies to prevent foreign particles
damaging the ceramic head works.
Do not remove the ceramic head works from the mixer when installing.
Damage caused by hydrostatic testing is not covered by Methven’s warranty.
Methven recommends a licensed plumber carry out all installations in compliance with
the requirements of AS/NZS 3500. This product complies with AS/NZS 3718 regulations.
April 2012
Installation Guide
www.methven.com
Customer Care Hotline: 1300 METHVEN (638 483)
Email: [email protected]
WMKA21005
2.5mm Hex key
Connected to Spout for
01-8284
Connected to T-piece
for 01-8307
Applies to basin
mixer only
MA018284 Waipori 3 Hole Hob Mounted Set AU.indd 1
2/05/12 2:33 PM
