Locations
Locations can be set up in SKALA Control in conjunction with certain devices to keep track
of continuous data at that location. This may be the temperature and humidity of a room or
the weight from a checkweigher on a packaging line.
Once this data is being collected, it can be viewed on Control, but sometimes it will also
need to be associated with a particular batch. For example, the checkweigher data for the
packaging of a particular batch should be attached to the batch number.
In order to capture location readings under a batch, that batch needs to be assigned to a
location for the amount of time it remains in the area. To assign and unassign lots from the
Hub, go into the settings page and click on locations.
Once in locations select the location you want to view and it will open up showing you any
Batches currently assigned to the location as well as a filter list to enter in and select the
batch number of a new batch to assign to the area. All location readings within the time
period will be logged to the batch.
9/28/18
SKALA System User Guide
49
Summary of Contents for SKALA
Page 1: ......
Page 2: ...SKALA USER MODULE...
