Samples - On the Screen
Underneath each Batch is a set of samples. Each sample refers
to the tests performed on each new sample of product from the
line.
Samples contain a set of required tests that are specific to the
Product being run.
Samples can have various pieces of data associated with them
such as the bin or wagon the sample was pulled from. This is
also specific to the Product begin run.
The “X” on the right side of the Sample allows you to remove
the Sample from the Hub. This WILL NOT delete any data. It
only deactivates the sample and hides it from view. If a sample
is cleared, ONLY readings associated with that sample will be
hidden.
9/28/18
SKALA System User Guide
39
Summary of Contents for SKALA
Page 1: ......
Page 2: ...SKALA USER MODULE...
