blue’Log X series
59 | 120
12.3
Showing inverter values
12.3.1
Diagrams
1.
Navigate to the "Cockpit" area via the top navigation bar.
2.
Navigate to the "Charts" area via the left-hand navigation menu and select
"Inverters".
Fig. 46: Device websites: Selecting inverter diagram options
3.
Select the inverter(s) from which to visualize the measured values.
4.
Select the available measured values. All measured values available for the
selected inverters will be shown. If an individual inverter is selected, a number of
measured values can be shown in parallel. If several inverters are selected, only
one measured value can be shown in each case.
5.
As an option, the display of real-time values can be selected in addition to historical
data in the diagram. The resolution of the real-time values is considerably higher
than of the historical values.
6.
Specify a period from which to visualize the measured values. No real-time
measured values are available for days in the past.