Thermal Imaging Camera
Installation Guide
LWIR
5- 4
5.3 About the Web Server Menu
The Web Server menu buttons are explained in the table below.
Item Description
Settings
- opens the camera settings options, which allow you to
Focus
the camera in/out, perform a non-uniform correction (
NUC
) on the camera,
select the
Unit
of temperature measurement, and change the system
Password
.
For more information see Section 5.4.
Frame Settings
- allows you to set the
Emissivity
,
Background
Temperature
, and any
Time Function
to be used in temperature
measurement for the entire thermal image.
For more information see Section 5.5.
Regions of Interest (ROI)
- you can create up to three Regions of Interest
(ROI) on the thermal image. For each ROI you can specify the
Emissivity
,
Background Temperature
,
Temperature Threshold
, and any
Time
Function
to be used in temperature measurement for the ROI.
These settings will override any set in the Frame settings.
For more information see Sections 5.6 and 5.7.
I/O
- allows you to set up to three outputs, or two outputs and one input.
For more information see Section 5.8.
Information
- gives read-only information relating to the system, including
camera type, serial number, software versions, latest calibration date, and
MAC address.
5.4 Settings
The following options are available in the Settings menu.
Item Description
Focus in/Focus out
- moves the camera lens in or out as required.
Press and let go to move the lens only a short distance.
Press and hold to move the lens a longer distance.
Non-Uniformity Correction (NUC)
- a non-uniformity correction adjusts
the thermal image for minor errors that are introduced gradually over time
due to the heat of the camera.
Press the
NUC
button to reset the thermal image.
Unit
(Temperature) - allows you to select either
° C
(Celsius) or
° F
(Fahrenheit) as
your unit of temperature measurement.
Security
- use the check-box to select whether or not you want to password-protect
your system.
Click on the
Change Password
button to set a new password. Follow the on-screen
instructions to set the password.
Summary of Contents for LAND LWIR
Page 47: ......
