Installation Requirements
Octane Basic User Guide
Page 11 of 25
3
INSTALLATION AND ENVIRONMENT REQUIREMENTS
Keywords: Room requirements, power needed, electrical requirements
3.1
POWER REQUIREMENTS
Component
XM2 Configuration
Workstation Power
400 watts (maximum); 100-240 Volts, 50/60 Hz, 3.5 to 7.0 Amps
Monitor
25 watts (typical) ; 100-240 Volts, 50/60 Hz
Detector
75 watts; 100-240 Volts, 47-63 Hz, 0.5 to 1.25 Amps
Table 2 - Power requirements
3.2
SPACE AND WEIGHT SPECIFICATIONS
Workstation dimensions:
17.5 (H) x 7.75 (W) x 19.5 in (44 x 20 x 49.5 cm)
Workstation weight:
33.0 lb. (14.97 kg)
Detector Body dimensions
4.375 (W) x 4.375 (H) x 6.75 in (L) (110 x 110 x 165 mm)
Detector Weight
8 lb. (3.63 kg)
3.3
ENVIRONMENT REQUIREMENTS
Parameters
Operating Conditions
Temperature
+5
C to +30
C
Humidity
0% to 85% RH, non-condensing
Barometric Pressure
525 to 800mm of Hg
Air Velocity
0 to 0.5m/sec
Table 3 - Environment requirements / Operating conditions
Summary of Contents for Apollo XF Octane
