Owner’s Manual
13
8. FUNCTIONS AND OPERATIONS
8.1 LEVELLING THE PLOW
In order to operate the equipment properly and also in order to avoid premature
wear of this equipment, it is imperative that the plow is level and square to the
ground during operations.
(Fig. 3)
The plow must sit 90 degrees square to the
ground when considering the angle of the pin that allows the wings to rotate onto the
mouldboard versus the ground.
(Fig. 4)
Operating the equipment that is not properly set or level can cause premature wear
of the edges and result in high maintenance costs.
Fig.3
Fig.4
The wing pin
Ground
Centered
in slot
Mechanical float
WARNING
