Metacon-Next
OHD-C EI(1) 60 / EI(2) 90 / EW 90
18-05-2021
User manual
art nr: 89022
Rev: 2
3
1
Foreword
Before using the door, please observe the safety and operating instructions listed in this
document.
Metacon only supplies products to "specialist retailers". This means that Metacon only
supplies a door and the installation is carried out by and under the responsibility of the
"specialist retailer".
If assembly and installation are carried out by a third party and the control unit is provided
by the installation company, the manufacturer of the fire shutter door will issue a CE
declaration in accordance with current European legislation.
It is the responsibility of the installation company to install the door in accordance with the
manual. The user manual must remain with the door at all times.
The type plate with the serial number is attached in the following location: On the drive side
on the guide, about 1600 mm from the bottom. This sticker must not be removed or
covered.
Metacon cannot be held liable for any unsafe situations, accidents, damage and injuries, for
example, resulting from:
Ignoring warnings or instructions displayed on the fire door and/or in the user
manual.
Insufficient and/or incorrect maintenance.
Changes to the fire door and accessories by third parties. This includes the
use of replacement parts other than those prescribed (e.g. a battery),
incorrect connection or adjustment, changing the controller and control
program.
Improper installation or assembly of the product.
Local (country-specific) additional regulations.
Reference documents:
NEN-EN 13241-1; NEN-EN 16034.
Terms and Conditions of the Metaalunie.
Installation Drawing Metacon.
Packing list with article numbers (spare parts list).
User manuals from the suppliers of motors and controllers for adjusting the
supplied drive and/or controller.
