Metabo MA-MS 25, Original Instructions Manual

Page: 12 / 128

ENGLISH en
12
Original instructions
We declare and accept sole responsibility for
ensuring: these pole pruner identified by their type
and serial number in connection with the cordless
multifunction drive MA-36-18 LTX BL Q *1) conform
to all relevant provisions of the directives *2) and
standards *3), testreport *4), issuing test office *4),
*5), technical documents at *6).
2000/14/EC: Conformity assessment procedures in
accordance with Annex V.
Measured sound power level *7), guaranteed
sound power level *8), - see page 3.
For UK only:
We as manufacturer and authorized person to
compile the technical file, see *6) on page 3,
hereby declare under sole responsibility that these
pole pruner, identified by type and serial number *1)
on page 3, fulfill all relevant provisions of following
UK Regulations S.I. 2016/1091, S.I. 2008/1597, S.I.
2001/1701, S.I: 2012/3032 and Designated
Standards EN 62841-1:2015, EN ISO 11680-
1:2011 (partly), EN ISO 11680-1:2021 (partly),
EN ISO 12100:2010, EN IEC 63000:2018.
S.I. 2008/1597: UK-Type Examination: No. MCA
2680; Approved Body acc. to Appendix IX: ID-No.
0120; SGS United Kingdom Limited, Unit 12A &
12B, Bowburn South Ind Est Durham, DH6 5AD
United Kingdom (GB)
The pole pruner attachment, in combination with the
cordless multifunction drive MA 36-18 LTX BL Q, is
designed for sawing through branches (max.
diameter: 20 cm (3/4“), across the grain.
It must be used only for machining wood. Do not use
it to fell trees. Do not cut roots, do not work close to
the ground. Do not machine any hazardous
materials.
Use only the recommended cutting sets (guide rail
and sawing chain). The use of other tools can lead
to serious injuries.
Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
This pole pruner attachment is intended for
attachment to an original Metabo cordless
multifunction drive with the designation MA 36-18
LTX BL Q.
Use only with the cordless multifunction drive in
place. The operating manual for the cordless
multidrive must be observed.
National regulations may restrict the use of the
device.
The user bears sole responsibility for any damage
caused by inappropriate use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.
For your own protection and for the
protection of your power tool, pay
attention to all parts of the text that are
marked with this symbol!
WARNING – Read the operating
instructions to reduce the risk of injury.
WARNING – Read all safety warnings,
instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
Always include these documents when passing on
your power tool.
Residual risks: Even when the device is used as
intended, there could be residual risks. Observe all
safety warnings and instructions.
Possible hazards:
- Prolonged exposure to vibrations can cause
injuries and neurovascular disorders (also called
“Raynaud’s syndrome” or “white finger”),
especially to people suffering from circulation
disorders. The symptoms can regard the hands,
wrists and fingers and are shown through loss of
sensitivity, torpor, itching, pain and discolouring of
or structural changes to the skin. These effects
can be worsened by low ambient temperatures
and/or by gripping the hand grips excessively
tightly. If the symptoms occur, the length of time
the machine is used must be reduced and a doctor
consulted.
4.1 Safety instructions for pole pruners
a) Keep all parts of the body away from the saw
chain when the chain saw is operating. Before
you start the chain saw, make sure the saw
chain is not contacting anything. A moment of
inattention while operating may cause
entanglement of your clothing or body with the saw
chain.
c)
Hold the machine by the insulated gripping
surfaces only, because the saw chain may
contact hidden wiring. Saw chains contacting a
"live" wire may make exposed metal parts of the
chain saw "live'" and could give the operator an
electric shock.
d)
Wear eye protection. Further protective
equipment for hearing, head, hands, legs and
feet is recommended. Adequate protective
equipment will reduce personal injury from flying
debris or accidental contact with the saw chain.
1. Declaration of Conformity
2. Specified Conditions of Use
3. General Safety Information
4. Special safety instructions