ENGLISH
en
9
2002/96/EC on used electronic and electric
equipment and its implementation in national
legal systems, used power tools must be collected
separately and handed in for environmentally
compatible recycling.
Explanatory notes on the specifications on page 3.
Changes due to technological progress reserved.
M = Torque
B
St
= Maximum sheet thickness (sheet steel)
B
Al
= Maximum sheet thickness (aluminium)
P
1
= Nominal power input
P2 = Power output
h
0
= Stroke rate at idle speed
h
1
= Stroke rate at rated load
r
min
= Smallest curve radius
m = Weight without mains cable
Measured values determined in conformity with
EN 60745.
Machine in protection class II
~
Alternating current
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. Depending on the operating
conditions, the condition of the power tool or the
accessories, the actual load may be higher or lower.
For assessment purposes, please allow for breaks
and periods when the load is lower. Based on the
adjusted estimates, arrange protective measures
for the user e.g. organisational measures.
Vibration total value (vector sum of three directions)
determined in accordance with EN 60745:
a
h
= Typical estimated acceleration
in the hand/arm area
(cutting sheet metal)
K
h
= Uncertainty (vibration)
Typical A-effective perceived sound levels:
L
pA
= Sound pressure level
L
WA
= Acoustic power level
K
pA
, K
WA
= Uncertainty
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
12. Technical Specifications
