27
ENGLISH
15.1 Available saw blades
Maximum workpiece cross section
Standard cross cuts
−
width / height
Mitre cuts (rotating table 45°)
−
width / height
Bevel cutss (track arm holder 45° left)
−
width / height
Compound mitre cuts (rotating table 45° / track arm holder 48° left)
−
width / height
mm
mm
mm
mm
285 / 81
200 / 81
285 / 50
200 / 45
285 / 81
200 / 81
285 / 50
200 / 45
Weight
Machine in packing
Machine ready to work
kg
kg
23
19,5
23
19,5
Permissible ambient temperature for operation
Permissible temperature for transport and storage
° C
° C
0 to + 40
0 to + 40
0 to + 40
0 to + 40
Noise emission according to EN ISO 3744
Sound power level L
WA
sound pressure level at operator ear L
PA
dB (A)
dB (A)
118
104
118
104
Effective value of weighted acceleration
(vibration at handle)
m/s
2
< 2.5
< 2.5
Dust collector (not included in standard delivery)
−
Suction port diameter
−
Minimum air volume flow
−
Minimum vacuum at suction port
−
Minimum air speed at suction port
mm
m
3
/h
Pa
m/s
43.5
550
740
20
43.5
550
740
20
*This machine is specially designed for the high momentary loads of crosscutting. The motor reaches the stated power of
1800 watts at S6 20% 5 min. (intermittent periodic duty-type with starting). This means that this saw can be operated for 1 minute at
full-load rating (1800 watts) within a 5 minute operating period. The motor has to deliver these 1800 watts only under extreme load
conditions
−
during normal crosscutting it is subjected to much lower loads. With lower loads the duty cycle of the motor increases
substancially. Thus, when used as specified, because of its high reserve capacity, overheating or overloading of the motor is not
possible.
Diameter
Arbor bore
Tooth rake
No. of teeth
Used for
Stock-no.
250 mm
30 mm
5° neg.
24
alternate top bevel
teeth
wood,
non-lamintated
particle board
091 003 0973
250 mm
30 mm
5° neg.
48
alternate top bevel
teeth
wood,
panels
091 003 1058
250 mm
30 mm
5° neg.
60
alternate top bevel
teeth
wood,
panels
thick-walled plas-
tic extrusions
091 003 0981
250 mm
30 mm
6° neg.
80
trapezoidal-flat
teeth
wood,
panels
Cable ducting,
NF profiles,
high-quality
veneered sheets,
laminates
091 003 1040
