597A-9800 Manual Rev A
Page | 1
1.
Introduction
The Model 597A multi-parameter weather sensor is an “All-in-One” device that measures
ambient temperature, relative humidity and barometric pressure. Sensor performance
complies with guidelines establish by the World Meteorological Organization (WMO) and
the US Environmental Protection Agency (EPA). The sensor is supplied with mounting
hardware and an integrated radiation shield and can be easily attached to lattice tower legs
and instruments masts up to 2 inches (IPS) in diameter. The Model 597A is supplied with
output terminals that digital output signals in several formats.
2.
Cautionary Statements
•
The sensor’s relative humidity output is referenced to saturated water vapor pressure
above liquid water. When the air temperature is below freezing, the sensor’s maximum
theoretical measurement range is limited.
•
To minimize exposure to direct sunlight install the sensor facing to the north in the
northern hemisphere and south in the southern hemisphere. This orientation will help
shield the sensor from direct sunlight and reduce temperature measurement errors.
3.
Initial Inspection
•
Upon receipt of the Model 597A, inspect the packaging and contents for damage. If the
packaging has arrived in a damaged condition file a claim with the shipping company
and contact Met One Instruments, Inc. to arrange for repair or replacement.
•
The model number and cable length are printed on a label at the connection end of the
cable. Check this information against the shipping documents to ensure the correct
product and cable length has been received.
Summary of Contents for 597A
Page 5: ......