Setup and Functioning
M=LIGHT LED BUS splitter stationary
8LE-D23_BA_E.docm
05.02.2019
37
/
88
4.6.2 Bus terminator
The bus terminator is a CAN-bus terminating resistor in the form of a feed-through connector. The
bus terminator has the resistance of the transmission medium and ensures that NO reflections
occur at the cable end.
Figure 32: Bus terminator and connections of the bus terminator
4.6.3 Sub-D extension 9-pin
Connecting cable between CAN@net II and M=LIGHT Bus Splitter. The Bus terminator is
connected between the Sub-D extension and CAN@net II.
