M=LIGHT connection set USB
Setup and Functioning
30
/
88
05.02.2019
8LE-D23_BA_E.docm
4.5
M=LIGHT connection set USB
4.5.1 M=LIGHT LED BUS Splitter mobile
The M=LIGHT LED BUS Splitter mobile separates the incoming CAN bus signals and flash
signals, which are transmitted via the RJ45 Ethernet cable from the M=LIGHT LED.
Pos.:
Description
1
DB9 port
2
BNC connection
3
Switch for inversion of Sync signal
4
RJ45 connection
5
Power connection
Figure 16: M=LIGHT LED BUS Splitter mobile
4.5.2 Connections M=LIGHT LED BUS Splitter mobile
Pos.:
Description
1
Flash_L
2
Flash_H
3
GND
4
9 V
5
GND
6
9 V
7
CAN_L
8
CAN_H
Figure 17: RJ45 connection for CAN-bus line
