1
meshle.com
MESHLE GmbH, Schwalbenweg 1, 40468 Düsseldorf, Germany
V23120207-2
EN
Operating instructions
MESHLE flex - Smart Bluetooth LED Controller
Safety notes
• The user of this device must have read and understood these ope-
rating instructions prior to its first use in order to safely implement
this device.
• Keep these operating instructions for the entire service life of the
product.
• Pass these operating instructions on to every further owner or user
of the product.
• The device must only be used when it functions properly. If the device
or part of the device is defective, have it repaired by a specialist.
• Never open the housing.
• Never use the unit in a room where there is a danger of explosion or
in the vicinity of flammable liquids or gases.
• Do not place or immerse the device in water or any other liquid.
• Main power voltage and fuse must meet the technical data specifi-
cations.
• Do not connect an LED strip that exceeds 6A load. The controller or
the LEDs can be damaged.
• Never short circuit the device.
• Never connect the controller directly to 230 V ~ mains voltage. There
is danger to your life.
• The ambient temperature must always be between -20°C (-4°F) -
+60°C (140°F). Keep away from direct insulation (particularly in cars)
and heaters.
• The device is designed for indoor use only.
• Do not use any chemical cleaners. Disconnect from mains before
starting cleaning.
• This product is not a toy and it is not suitable for children.
Important!
Please consider that unauthorized modifications on the device are
forbidden due to safety reasons! If this device will be operated in
any way different to the one described in this manual, the product
may suffer damages and the guarantee becomes void. Furthermore,
any other operation may lead to dangers like short-circuit, burns,
electric shock, crash etc. Personal injury or material damage caused
by an improper use shall not be the manufacturer‘s but the user‘s
responsibility.
Product description
MESHLE flex - Smart Bluetooth LED Controller with network capability
serves for control of RGBW LED strips. The control unit requires an
operating voltage of 5V – 24V direct current. Each controller has an
integrated Bluetooth Low Energy chip. LED strip that is connected to a
MESHLE flex controller can be controlled directly with the smartphone
via Bluetooth. Multiple MESHLE flex controllers build a Bluetooth mesh
network which allows to control multiple RGBW LED strips individually or
in a group with iOS & Android app.
Delivery includes
1 x Controller unit
1 x 5 PIN RGBW LED Strip Connector
1 x Mounting pad
1 x Operating instructions
Technical data
Controller
Rated voltage:
5 – 24 V DC
Current max.:
6 A
Dimensions:
11mm x 22mm x 169mm
Weight:
20g
Power supply (not included)
Rated voltage:
230 V, 50 Hz~
Output:
5 – 24 V DC
Current max.:
6 A (max)
Connector:
DC connector male 5.5/2.1 mm,
center: positive
RGBW LED Strips (not included)
Rated voltage:
5 – 24 V DC
Current max.:
6 A
Connector:
5 pin RGBW connector
(2.54 mm, Mating pin Ø 0.6 mm)
Important!
Do not connect an LED strip that exceeds 6A. The controller or
the LEDs can be damaged!
Smartphone (not included)
Operating system:
At least iOS 9 or Android 4.4
Bluetooth
Bluetooth 4.0 (Bluetooth Low Energy)
(available starting from Android 4.3 and
iPhone 4S) Range distance*: up to 25m
(82ft) in free field
*Range distance
Starting at a distance up to 25m (82ft) the radio range will be automati-
cally extended when additional MESHLE flex controllers are added to the
network. A command from your smartphone is passed along from one
controller to another.
Mounting and connection
• Step 1: Connect the plug of the control unit via 5 PIN RGBW LED strip
connector to the input connector of the LED ribbon. The arrows of
both plugs must point to each other. Otherwise the LEDs do not
light up.
• Step 2: Place the controller in a suitable location using the supplied
mounting pad.
• Step 3: Connect a suitable power supply unit to power input of the
controller. Plug the power adapter into a working 230 V ~ socket. The
LEDs light up according to the last control program selected.
App-Download
Please download the app „MESHLE“ on your smartphone via iOS App
Store or Android Google Play Store.
Operation
After you have connected the controller to RGBW LED strip and power
supply as shown in the connection diagram
and have downloaded the app on your smartphone, please proceed
as follows:
• Step 1: Turn on Bluetooth on your smartphone.
• Step 2: Start the app. The search for controllers will start automati-
cally.
• Step 3: Follow the instructions in the app.
Firmware updates
You can upgrade MESHLE flex firmware using your smartphone. The
ability to update controllers over the air allows us to bring new features
for the firmware with the future updates.
Reset Device
Reset the device to factory settings by using a thin object (e.g. paperclip
or needle) to press the reset button.
FCC Class B Information (United States Only)
Note:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encoura-
ged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user‘s authority to
operate this equipment.
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions. (1) This device may not cause harmful
interference. (2) This device must accept any interference received,
including interference that may cause undesired operation.
Industry Canada
This device complies with Industry Canada license-exempt RSS Stan-
dard(s). Operation is subject to the following two conditions. (1) This
device may not cause harmful interference. (2) This device must accept
any interference received, including interference that may cause
undesired operation.
Le présent appareil est conforme aux CNR d‘Industrie Canada applica-
bles aux appareils radio exempts de licence.L‘exploitation est autorisée
aux deux conditions suivantes: (1) l‘appareil ne doit pas produire de
brouillage, et (2) l‘utilisateur de l‘appareil doit accepter tout brouillage
MESHLE flex – Model No. 568M-1
1
2
3