Mesalabs ViewPoint Essentials DS-VP-ESS-900-S-HUMI, User Manual, Page: 17 / 21

VP Essentials Sensor User Manual (Rev. A) 17
Mesa Labs, Inc.
12100 W. 6th Avenue
Lakewood, CO 80228 USA
Tel: 303-565-2724
monitoring.mesalabs.c
om
techsupport@mesalabs.com
Radio
900 MHz (902-928 MHz) frequency hopping with 4 channels
Other
NIST or ISO/IEC ILAC-MRA 17025:2005 Certificate of Calibration: Self-service, probe
swap or on-site calibration options
11.0 Probe List
11.1 DS-VP-ESS-900-S-TEMP - VP Essentials 900MHz Temperature Sensor
Probe / Input Part Number
Air Temperature Probe 72107
3" Stainless Steel Temperature Probe
-30
°C
to +60
°C
72105-12
Door Switch, Motion, Alarm Contact 43006
Table 11-1 Probe / Input Part Numbers
11.2 DS-VP-ESS-900-S-HUMI - VP Essentials 900MHz Humidity Sensor
Probe / Input Part Number
Temp/Humidity (Snap) 72112
Door Switch, Motion, Alarm Contact 43006
Table 11-2 Probe / Input Part Numbers
12.0 Accessory List
Accessory Type Part Number
Battery 1.5V AA Alkaline TWA53-A
Cable, Snap Extension, 25', 22AWG 63001
Cable, Snap Extension, 75', 22AWG 63000
Single Bottle with PGX TWA200A
Table 12-1 Accessory Type Part Numbers
13.0 CheckPoint G4 Compatibility
VP Essentials 900 MHz sensors can be configured to communicate with the CheckPoint G4 radio network
protocol. VP Essentials 900 MHz sensors, when configured correctly, can be used as a compatible
alternative for CheckPoint G4 sensors and must use a CheckPoint G4 Access Point.
Model Part Number
G4 900MHz Access Point 45010-V4
Table 15-1 VPx Pro G4 Compatibility Mode Required Hardware
G4 and G5 protocols are not directly compatible with each other. Any related system hardware
components must run exclusively on the same protocol.