Meru Networks ap400, Installation Manual

Page: 37 / 47

USA
© 2010 Meru Networks, Inc. Regulatory Information 25
USA
Underwriters Laboratories
For the AP150, AP300, AP400, AP1000, and the OAP180 series, the following state-
ment and notices are applicable:
Use only with Listed I.T.E. equipment.
Notices
The unit is intended for installation in Environment A as defined in IEEE 802.3.af. All
interconnected equipment must be contained within the same building, including the
interconnected equipment's associated LAN connection.
Suitable for use in environmental air space in accordance with Section 300-22(c) of
the National Electrical Code, and Sections 2-128, 12-010(3) and 12-100 of the Cana-
dian Electrical Code, Part 1, C22.1.
FCC Radiation Exposure Statement
Radio Frequency Interference Requirements
The Interference Statement applies to the following APs:

AP150

OAP180

AP1000

AP300

AP400
Caution!
The radiated output power of the Meru Networks devices is well below the FCC
radio frequency exposure limits. However, the Access Point should be used in
such a manner that the potential for human contact during normal operation is
minimized. When installing and operating these devices, keep a minimum
distance of 20 cm (8 inches) between the antennas and any persons/users in the
vicinity.