- 20 -
U.motion KNX Server Plus, Touch
Installation Manual
For rooms it’s also possible to create further sub-menus following the same procedure (as in the further course of this
manual will be explained); the resulting tree-structure can so also be used in the visualisation.
The DELETE button removes the selected entries from the project. This action is blocked for the system menus and
indispensable objects, for preventing the user to remove them by accident.
2.4.2
M
ENU
S
TRUCTURE
The navigation menu permits to access every setting of the web server and has the following structure:
2.4.3
S
ETUP
The menu SETUP contains the following entries:
LANGUAGE
Permits to change the language of the GUI
NETWORK
Permits to configure the network parameters of U.motion KNX Server Plus Touch
UPDATE
Permits to update the web server through specific update-packages
BACKUP/RESTORE
Permits to create a backup of the current database, to import an already created backup
or to reset the database to factory settings
DATE/TIME
Permits to configure date/time of the web server and all date/time related settings
DISPLAY
Allows the configuration of the screensaver and display power-off settings of the device.
Additionally the calibration of the touchscreen can be started from within this settings
page.
Further information can be found in the appropriate section of this manual.
2.4.4
T
ECHNOLOGIES
-
KNX
This section contains all settings for establishing a communication with the KNX bus:
ETS-IMPORT-RULES
Permits to configure import-rules, through which the imported group addresses will
automatically be configured and connected to the desired icon/function, in dependence
of the defined keywords
ETS IMPORT
Allows the import of a ETS-project into U.motion KNX Server Plus Touch
CONFIGURE
COMMUNICATION
Permits to change the parameters of the used KNX communication interface
ETS PROJECT
Permits to navigate through the single group addresses and to edit them; the navigation
structure will be the same as the one in ETS.
SETUP
Contains generic settings and parameters of the web server
TECHNOLOGIES
Contains the configuration pages of all technologies supported by the web server (KNX.
Video surveillance, intercom etc.)
CUSTOMIZATION
Contains the configuration pages for customizing the graphical design of the
visualisation and the web server plugins
VISUALISATION
Allows the configuration of the visualisation itself (rooms, functions, scenarios etc.)
ADVANCED FUNCTIONS
Allows the configuration of additional functions (e.g. logics, notifications etc.)
USERS AND PERMISSIONS
Allows the configuration of new users and their access permissions
