18
1. Open the sewing table and looper cover.
2. Turn the balance wheel toward you until the needle
goes up to the highest position.
3. Remove the needle plate and presser foot.
4. Using a lint brush (in the accessory box) to brush
around the feed dog.
5. Re-set needle plate and presser foot.
Cleaning and oiling
1. Open the looper cover.
2. Apply 2-3 drops of fine quality sewing machine oil
to the parts as indicated.
3. It is recommended to apply oil once a week in
normal use, once in ten hours in continuous use.
-Cleaning upper knife area-
-Oiling-
1. Open the looper cover.
2. Using a lint brush (in the accessory box) to
brush the upper knife and lower knife area.
Feed dog
Upper knife
2-3 Drops
Lower knife
Lint brush
-Cleaning the feed dog-
* Disconnect the machine from the power supply
before cleaning.
