9
- Open the looper cover and sewing table.
- Place the spool on right spool holder.
- Draw the thread through the pre-tension thread guide (1)
from right to left.
- Thread from left to right around the thread guide (2)
- Thread guides (3, 4, 5, 6)
- Turn the balance wheel toward you until the lower looper
extending out 5-10mm from the needle plate edge.
- Pull the thread with tweezers to pass through the lower
looper hole.
- Draw the thread with your left hand tightly.
- Use your finger to push the automatic threader up to
the topmost, and then thread goes throught the lower
looper automatically.
Threading the lower looper (red)
(2)
(5)
(4)
(3)
(1)
2
(a)
(b)
c
( )
(d)
(e)
(f)
(6)
Lower looper
hole
Thread guide (6)
Lower looper
Automatic threader
3
4
2
