Single Button Remote Control
Model E940M
3-Button Remote Control
Model E943M
TO ERASE ALL CODES FROM MEMORY
TRANSMITTERS & WIRELESS WALL CONTROL
MODELS E940M , E943M, E945M, E950M, E128M & E138M
Press and hold the button on
the remote control or wireless
wall control you wish to use. The
LED indicator on
the transmitter
continuously
(except E945M).
Locate
the learn
button.
Press and
immediately release
the Learn button.
For use with Security 2.0 Garage Door Openers. The code between the
the remote control and the receiver changes with each use, randomly
accessing over a billion new codes. Refer to your product manual for the
location of the learn button.
NOTE:
Your product may look
than the products illustrated
in this manual.
When deactivating any unwanted remote
control code, all previous codes will be
erased.
Press and hold the Learn button on garage door opener
until the learn LED goes out (approximately 6 seconds).
All previous codes are now erased. Reprogram each
remote control you wish to use.
LED
LED
PROGRAM USING THE GARAGE DOOR OPENER
+
ROLLER DOOR
OPENER
LEARN
BUTTON
3- Button Mini Remote Control
Model E945M
Wireless Wall Control
Model E128M
“click”
“click”
The opener
or 2 clicks are
heard when
it has learnt
the code.
4
LED
LED
INDICATOR
SECTIONAL DOOR
OPENER
LEARN
BUTTON
LED
INDICATOR
•
•
•
To prevent possible SERIOUS INJURY or DEATH from a moving gate or garage door:
ALWAYS keep remote controls out of reach of children. NEVER permit children to operate, or play with remote controls.
Activate gate or door ONLY when it can be seen clearly, is properly adjusted, and there are no obstructions to door travel.
ALWAYS keep gate or garage door in sight until completey closed. NEVER permit anyone to cross path of moving gate or door.
4-Button Remote Control
Model E950M
LED
LED
Wireless Wall Control
Model E138M
